The shape of the modelled column above this mountain: temperature and wet-bulb against
height, humidity beside it, and four restrained readings of what that shape is. Up to nine
requested pressure levels, sparse and terrain-filtered, not a sounding — /now
has the surface observations, which are measurements and are deliberately kept separate
from this.
NSW · lifted 1365–2037 m
Model
View
Humidity
12 valid times, 6-hourly AEST, out to 72 hours.
Hours between these are not drawn.
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 1466 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 1466 m
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 1466 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 1499 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 1499 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 1251 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 1251 m
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+4.5°top
dry-bulb — base · +8.9° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.6°top
dry-bulb — base · +9.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.7°top
dry-bulb — base · +9.4° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.7°top
dry-bulb — base · +8.4° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.0°top
dry-bulb — base · +8.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.7°top
dry-bulb — base · +9.4° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3150–4374 m
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+6.1°top
dry-bulb — base · +8.3° top
Moisture + DGZ0.4 km+ 5417–5783 m+
Moist layer 2.6 km+ 3152–5783 m
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.0°top
dry-bulb — base · +6.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.9 km 1466–4362 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.3°top
dry-bulb — base · +7.0° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.9 km 1466–4360 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.5°top
dry-bulb — base · +6.9° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.9 km 1466–4359 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+5.9°top
dry-bulb — base · +6.5° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 0.1 km 1466–1546 m
Moist at resortPartial 80 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.4°top
dry-bulb — base · +5.8° top
Moisture + DGZ0.7 km+ 5030–5728 m+
Moist layer 4.3 km+ 1466–5728 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+4.9°top
dry-bulb — base · +8.9° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+5.7°top
dry-bulb — base · +10.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.7°top
dry-bulb — base · +9.8° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.6°top
dry-bulb — base · +9.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.1°top
dry-bulb — base · +9.4° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.5°top
dry-bulb — base · +10.3° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3156–4383 m
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+6.6°top
dry-bulb — base · +9.3° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3157–4384 m
Moist at resortNo overlap 0 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.3°top
dry-bulb — base · +7.3° top
Moisture + DGZ0.3 km+ 5446–5778 m+
Moist layer 4.3 km+ 1466–5778 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.3°top
dry-bulb — base · +7.1° top
Moisture + DGZ0.4 km+ 5369–5779 m+
Moist layer 4.3 km+ 1466–5779 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+6.0°top
dry-bulb — base · +6.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.9 km 1466–4362 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+5.5°top
dry-bulb — base · +6.3° top
Moisture + DGZ0.5 km+ 5220–5762 m+
Moist layer 4.3 km+ 1466–5762 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+5.3°top
dry-bulb — base · +6.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.9 km 1466–4339 m
Moist at resortResolvable layer 571 m moist of 571 m resolvable · 101 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+4.0°top
dry-bulb — base · +7.0° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+4.5°top
dry-bulb — base · +9.3° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+5.9°top
dry-bulb — base · +9.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3163–4386 m
Moist at resortNo overlap 0 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+6.3°top
dry-bulb — base · +8.8° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+5.5°top
dry-bulb — base · +7.3° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.3 km 2060–4369 m
Moist at resortNo overlap 0 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+6.2°top
dry-bulb — base · +11.5° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3142–4364 m
Moist at resortNo overlap 0 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+6.7°top
dry-bulb — base · +6.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.6 km 1499–3135 m
Moist at resortResolvable layer 538 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+5.6°top
dry-bulb — base · +5.7° top
Moisture + DGZ0.4 km+ 5335–5753 m+
Moist layer 4.3 km+ 1499–5753 m
Moist at resortResolvable layer 538 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+5.9°top
dry-bulb — base · +6.0° top
Moisture + DGZ0.4 km+ 5293–5737 m+
Moist layer 4.2 km+ 1499–5737 m
Moist at resortResolvable layer 538 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulbbelow profilebase+1.4°top
dry-bulb — base · +1.6° top
Moisture + DGZ0.6 km+ 5139–5727 m+
Moist layer 4.2 km+ 1499–5727 m
Moist at resortResolvable layer 538 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+2.5°top
dry-bulb — base · +2.9° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 0.5 km 1499–2038 m
Moist at resortResolvable layer 538 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulbbelow profilebase+2.9°top
dry-bulb — base · +3.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.6 km 1499–3103 m
Moist at resortResolvable layer 538 m moist of 538 m resolvable · 134 m below profile
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.9°base+5.2°top
dry-bulb +13.4° base · +7.3° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+8.7°base+5.7°top
dry-bulb +12.6° base · +9.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+8.4°base+6.6°top
dry-bulb +12.5° base · +10.0° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+7.8°base+5.7°top
dry-bulb +11.4° base · +7.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.3 km 2073–4385 m
Moist at resortNo overlap 0 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.3°base+5.2°top
dry-bulb +11.2° base · +6.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.3 km 2062–4370 m
Moist at resortNo overlap 0 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+8.5°base+6.1°top
dry-bulb +11.2° base · +7.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.1 km 2061–3149 m
Moist at resortNo overlap 0 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+9.0°base+6.5°top
dry-bulb +10.5° base · +7.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 3.1 km 1251–4378 m
Moist at resortBase to top 672 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+9.4°base+7.0°top
dry-bulb +10.0° base · +7.1° top
Moisture + DGZ0.3 km+ 5434–5773 m+
Moist layer 4.5 km+ 1251–5773 m
Moist at resortBase to top 672 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.5°base+6.7°top
dry-bulb +10.4° base · +6.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 3.1 km 1251–4358 m
Moist at resortBase to top 672 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+5.8°base+4.7°top
dry-bulb +6.1° base · +5.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.9 km 1251–3136 m
Moist at resortBase to top 672 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+6.2°base+4.5°top
dry-bulb +6.2° base · +5.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.9 km 1251–3132 m
Moist at resortBase to top 672 m moist of 672 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+6.2°base+4.1°top
dry-bulb +6.3° base · +4.5° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.9 km 1251–3108 m
Moist at resortBase to top 672 m moist of 672 m resolvable
Modelled vertical profile
Temperature, wet-bulb and relative humidity against metres above sea level
Full column · surface through the highest genuine supplied level.
Dry-bulbWet-bulbRelative humidityResort elevation bandMoist layerMoist + DGZ overlap Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — outside supplied profile Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Modelled inversion layerModel grid terrain
Mountain detail · genuine surface-through-700 hPa levels on a linear zoom.
Dry-bulbWet-bulbRelative humidityResort elevation bandMoist layerMoist + DGZ overlap DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view Dendritic range −12 to −18 °C — outside supplied profile DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view Modelled inversion layerModel grid terrain
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5807 m (4341 m).
Lowest-layer lapse rate
34.9 °C/km between the model surface (1466 m) and 850 hPa (1575 m) — at or above the dry adiabatic rate. Measured across 109 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5652 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5795 m (4329 m).
Lowest-layer lapse rate
-14.7 °C/km between the model surface (1466 m) and 850 hPa (1568 m) — temperature rises with height. Measured across 102 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1568 m (the model surface to 850 hPa): 10.6 °C rising to 12.1 °C, 14.7 °C/km of
warming over 102 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5432 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5792 m (4326 m).
Lowest-layer lapse rate
-34 °C/km between the model surface (1466 m) and 850 hPa (1569 m) — temperature rises with height. Measured across 103 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1569 m (the model surface to 850 hPa): 9.1 °C rising to 12.6 °C, 34 °C/km of
warming over 103 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5299 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5792 m (4326 m).
Lowest-layer lapse rate
-14.1 °C/km between the model surface (1466 m) and 850 hPa (1565 m) — temperature rises with height. Measured across 99 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1565 m (the model surface to 850 hPa): 10.2 °C rising to 11.6 °C, 14.1 °C/km of
warming over 99 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5414 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5790 m (4324 m).
Lowest-layer lapse rate
28.1 °C/km between the model surface (1466 m) and 850 hPa (1562 m) — at or above the dry adiabatic rate. Measured across 96 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5561 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5783 m (4317 m).
Lowest-layer lapse rate
-7.2 °C/km between the model surface (1466 m) and 850 hPa (1549 m) — temperature rises with height. Measured across 83 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1549 m (the model surface to 850 hPa): 12.2 °C rising to 12.8 °C, 7.2 °C/km of
warming over 83 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1224 m contiguous at or above 80%
RH, 3150–4374 m across 700 hPa, 600 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5554 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5783 m (4317 m).
Lowest-layer lapse rate
-6.5 °C/km between the model surface (1466 m) and 850 hPa (1558 m) — temperature rises with height. Measured across 92 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1558 m (the model surface to 850 hPa): 10.9 °C rising to 11.5 °C, 6.5 °C/km of
warming over 92 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
2631 m contiguous at or above 80%
RH, 3152–5783 m across 700 hPa, 600 hPa, 500 hPa (lowest 84%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5417 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5775 m (4309 m).
Lowest-layer lapse rate
1.2 °C/km between the model surface (1466 m) and 850 hPa (1547 m) — stable — shallow fall with height. Measured across 81 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2896 m contiguous at or above 80%
RH, 1466–4362 m across the model surface, 850 hPa, 700 hPa, 600 hPa (lowest 83%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5548 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5770 m (4304 m).
Lowest-layer lapse rate
17.3 °C/km between the model surface (1466 m) and 850 hPa (1547 m) — at or above the dry adiabatic rate. Measured across 81 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2894 m contiguous at or above 80%
RH, 1466–4360 m across the model surface, 850 hPa, 700 hPa, 600 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5515 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5764 m (4298 m).
Lowest-layer lapse rate
3.7 °C/km between the model surface (1466 m) and 850 hPa (1548 m) — stable — shallow fall with height. Measured across 82 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2893 m contiguous at or above 80%
RH, 1466–4359 m across the model surface, 850 hPa, 700 hPa, 600 hPa (lowest 86%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5356 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5757 m (4291 m).
Lowest-layer lapse rate
1.3 °C/km between the model surface (1466 m) and 850 hPa (1546 m) — stable — shallow fall with height. Measured across 80 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
80 m contiguous at or above 80%
RH, 1466–1546 m across the model surface, 850 hPa (lowest 97%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5253 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5728 m (4262 m).
Lowest-layer lapse rate
-1.5 °C/km between the model surface (1466 m) and 850 hPa (1532 m) — temperature rises with height. Measured across 66 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1532 m (the model surface to 850 hPa): 8.6 °C rising to 8.7 °C, 1.5 °C/km of
warming over 66 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
4262 m contiguous at or above 80%
RH, 1466–5728 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 88%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5030 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5807 m (4341 m).
Lowest-layer lapse rate
47.7 °C/km between the model surface (1466 m) and 850 hPa (1577 m) — at or above the dry adiabatic rate. Measured across 111 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5592 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5802 m (4336 m).
Lowest-layer lapse rate
24.3 °C/km between the model surface (1466 m) and 850 hPa (1569 m) — at or above the dry adiabatic rate. Measured across 103 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5548 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5803 m (4337 m).
Lowest-layer lapse rate
-32.1 °C/km between the model surface (1466 m) and 850 hPa (1572 m) — temperature rises with height. Measured across 106 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1572 m (the model surface to 850 hPa): 9.6 °C rising to 13.0 °C, 32.1 °C/km of
warming over 106 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5395 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5794 m (4328 m).
Lowest-layer lapse rate
-11.1 °C/km between the model surface (1466 m) and 850 hPa (1565 m) — temperature rises with height. Measured across 99 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1565 m (the model surface to 850 hPa): 11.0 °C rising to 12.1 °C, 11.1 °C/km of
warming over 99 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5382 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5802 m (4336 m).
Lowest-layer lapse rate
35.3 °C/km between the model surface (1466 m) and 850 hPa (1568 m) — at or above the dry adiabatic rate. Measured across 102 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5419 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5793 m (4327 m).
Lowest-layer lapse rate
15.7 °C/km between the model surface (1466 m) and 850 hPa (1555 m) — at or above the dry adiabatic rate. Measured across 89 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1227 m contiguous at or above 80%
RH, 3156–4383 m across 700 hPa, 600 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5448 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5794 m (4328 m).
Lowest-layer lapse rate
-18.3 °C/km between the model surface (1466 m) and 850 hPa (1559 m) — temperature rises with height. Measured across 93 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1466–1559 m (the model surface to 850 hPa): 11.0 °C rising to 12.7 °C, 18.3 °C/km of
warming over 93 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1227 m contiguous at or above 80%
RH, 3157–4384 m across 700 hPa, 600 hPa (lowest 86%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5470 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5778 m (4312 m).
Lowest-layer lapse rate
5.7 °C/km between the model surface (1466 m) and 850 hPa (1553 m) — moderate — near the saturated rate. Measured across 87 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4312 m contiguous at or above 80%
RH, 1466–5778 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 87%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5446 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5779 m (4313 m).
Lowest-layer lapse rate
21.3 °C/km between the model surface (1466 m) and 850 hPa (1560 m) — at or above the dry adiabatic rate. Measured across 94 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4313 m contiguous at or above 80%
RH, 1466–5779 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 81%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5369 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5768 m (4302 m).
Lowest-layer lapse rate
18.2 °C/km between the model surface (1466 m) and 850 hPa (1554 m) — at or above the dry adiabatic rate. Measured across 88 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2896 m contiguous at or above 80%
RH, 1466–4362 m across the model surface, 850 hPa, 700 hPa, 600 hPa (lowest 89%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5305 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5762 m (4296 m).
Lowest-layer lapse rate
5.7 °C/km between the model surface (1466 m) and 850 hPa (1554 m) — moderate — near the saturated rate. Measured across 88 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4296 m contiguous at or above 80%
RH, 1466–5762 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 86%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5220 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 1466–5740 m (4274 m).
Lowest-layer lapse rate
14.3 °C/km between the model surface (1466 m) and 850 hPa (1536 m) — at or above the dry adiabatic rate. Measured across 70 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2873 m contiguous at or above 80%
RH, 1466–4339 m across the model surface, 850 hPa, 700 hPa, 600 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5126 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5797 m (4298 m).
Lowest-layer lapse rate
68.4 °C/km between the model surface (1499 m) and 850 hPa (1575 m) — at or above the dry adiabatic rate. Measured across 76 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5512 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5790 m (4291 m).
Lowest-layer lapse rate
-22.4 °C/km between the model surface (1499 m) and 850 hPa (1566 m) — temperature rises with height. Measured across 67 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1499–1566 m (the model surface to 850 hPa): 10.0 °C rising to 11.5 °C, 22.4 °C/km of
warming over 67 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5418 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5791 m (4292 m).
Lowest-layer lapse rate
-34.3 °C/km between the model surface (1499 m) and 850 hPa (1569 m) — temperature rises with height. Measured across 70 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1499–1569 m (the model surface to 850 hPa): 10.8 °C rising to 13.2 °C, 34.3 °C/km of
warming over 70 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1223 m contiguous at or above 80%
RH, 3163–4386 m across 700 hPa, 600 hPa (lowest 88%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5360 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5786 m (4287 m).
Lowest-layer lapse rate
-25 °C/km between the model surface (1499 m) and 850 hPa (1559 m) — temperature rises with height. Measured across 60 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1499–1559 m (the model surface to 850 hPa): 10.3 °C rising to 11.8 °C, 25 °C/km of
warming over 60 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5394 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5779 m (4280 m).
Lowest-layer lapse rate
74.1 °C/km between the model surface (1499 m) and 850 hPa (1557 m) — at or above the dry adiabatic rate. Measured across 58 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2309 m contiguous at or above 80%
RH, 2060–4369 m across 800 hPa, 700 hPa, 600 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5611 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5771 m (4272 m).
Lowest-layer lapse rate
-27 °C/km between the model surface (1499 m) and 850 hPa (1536 m) — temperature rises with height. Measured across 37 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1499–1536 m (the model surface to 850 hPa): 14.6 °C rising to 15.6 °C, 27 °C/km of
warming over 37 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1222 m contiguous at or above 80%
RH, 3142–4364 m across 700 hPa, 600 hPa (lowest 93%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5446 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5773 m (4274 m).
Lowest-layer lapse rate
-8.3 °C/km between the model surface (1499 m) and 850 hPa (1547 m) — temperature rises with height. Measured across 48 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1499–1547 m (the model surface to 850 hPa): 9.7 °C rising to 10.1 °C, 8.3 °C/km of
warming over 48 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1636 m contiguous at or above 80%
RH, 1499–3135 m across the model surface, 850 hPa, 800 hPa, 700 hPa (lowest 86%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5624 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5753 m (4254 m).
Lowest-layer lapse rate
9.3 °C/km between the model surface (1499 m) and 850 hPa (1542 m) — steep. Measured across 43 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4254 m contiguous at or above 80%
RH, 1499–5753 m across the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 81%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5335 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5737 m (4238 m).
Lowest-layer lapse rate
14.3 °C/km between the model surface (1499 m) and 850 hPa (1534 m) — at or above the dry adiabatic rate. Measured across 35 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4238 m contiguous at or above 80%
RH, 1499–5737 m across the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 97%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5293 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5727 m (4228 m).
Lowest-layer lapse rate
-2.3 °C/km between the model surface (1499 m) and 850 hPa (1542 m) — temperature rises with height. Measured across 43 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1499–1542 m (the model surface to 850 hPa): 4.8 °C rising to 4.9 °C, 2.3 °C/km of
warming over 43 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
4228 m contiguous at or above 80%
RH, 1499–5727 m across the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 93%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5139 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5713 m (4214 m).
Lowest-layer lapse rate
8.7 °C/km between the model surface (1499 m) and 850 hPa (1545 m) — steep. Measured across 46 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
539 m contiguous at or above 80%
RH, 1499–2038 m across the model surface, 850 hPa, 800 hPa (lowest 94%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 4888 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1499–5690 m (4191 m).
Lowest-layer lapse rate
0 °C/km between the model surface (1499 m) and 850 hPa (1537 m) — near-isothermal. Measured across 38 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1604 m contiguous at or above 80%
RH, 1499–3103 m across the model surface, 850 hPa, 800 hPa, 700 hPa (lowest 96%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4719 m and -18 °C at 5466 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5808 m (4557 m).
Lowest-layer lapse rate
7 °C/km between the model surface (1251 m) and 850 hPa (1578 m) — steep. Measured across 327 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5598 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5793 m (4542 m).
Lowest-layer lapse rate
-0.6 °C/km between the model surface (1251 m) and 850 hPa (1572 m) — temperature rises with height. Measured across 321 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1572 m (the model surface to 850 hPa): 12.5 °C rising to 12.7 °C, 0.6 °C/km of
warming over 321 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5387 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5799 m (4548 m).
Lowest-layer lapse rate
-4.4 °C/km between the model surface (1251 m) and 850 hPa (1569 m) — temperature rises with height. Measured across 318 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1569 m (the model surface to 850 hPa): 12.0 °C rising to 13.4 °C, 4.4 °C/km of
warming over 318 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5377 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5790 m (4539 m).
Lowest-layer lapse rate
-0.6 °C/km between the model surface (1251 m) and 850 hPa (1569 m) — temperature rises with height. Measured across 318 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1569 m (the model surface to 850 hPa): 11.3 °C rising to 11.5 °C, 0.6 °C/km of
warming over 318 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
2312 m contiguous at or above 80%
RH, 2073–4385 m across 800 hPa, 700 hPa, 600 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5356 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5789 m (4538 m).
Lowest-layer lapse rate
1.6 °C/km between the model surface (1251 m) and 850 hPa (1560 m) — stable — shallow fall with height. Measured across 309 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2308 m contiguous at or above 80%
RH, 2062–4370 m across 800 hPa, 700 hPa, 600 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Not covered by the supplied levels The coldest point the supplied profile reaches is -11.2 °C, at 500 hPa, warmer than -12 °C. The dendritic range lies above what this model supplies here, and is not extrapolated to. This says nothing about whether such a layer exists above the highest level.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5780 m (4529 m).
Lowest-layer lapse rate
-0.3 °C/km between the model surface (1251 m) and 850 hPa (1558 m) — near-isothermal. Measured across 307 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1558 m (the model surface to 850 hPa): 11.2 °C rising to 11.3 °C, 0.3 °C/km of
warming over 307 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1088 m contiguous at or above 80%
RH, 2061–3149 m across 800 hPa, 700 hPa (lowest 83%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5475 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5784 m (4533 m).
Lowest-layer lapse rate
-1.9 °C/km between the model surface (1251 m) and 850 hPa (1565 m) — temperature rises with height. Measured across 314 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1565 m (the model surface to 850 hPa): 10.3 °C rising to 10.9 °C, 1.9 °C/km of
warming over 314 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
3127 m contiguous at or above 80%
RH, 1251–4378 m across the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa (lowest 82%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5442 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5773 m (4522 m).
Lowest-layer lapse rate
-0.7 °C/km between the model surface (1251 m) and 850 hPa (1557 m) — temperature rises with height. Measured across 306 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1557 m (the model surface to 850 hPa): 9.9 °C rising to 10.1 °C, 0.7 °C/km of
warming over 306 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
4522 m contiguous at or above 80%
RH, 1251–5773 m across the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 89%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5434 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5758 m (4507 m).
Lowest-layer lapse rate
0.3 °C/km between the model surface (1251 m) and 850 hPa (1550 m) — near-isothermal. Measured across 299 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
3107 m contiguous at or above 80%
RH, 1251–4358 m across the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa (lowest 90%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5237 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5744 m (4493 m).
Lowest-layer lapse rate
0.3 °C/km between the model surface (1251 m) and 850 hPa (1559 m) — near-isothermal. Measured across 308 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1885 m contiguous at or above 80%
RH, 1251–3136 m across the model surface, 850 hPa, 800 hPa, 700 hPa (lowest 93%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 4985 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5732 m (4481 m).
Lowest-layer lapse rate
-0.3 °C/km between the model surface (1251 m) and 850 hPa (1557 m) — near-isothermal. Measured across 306 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1557 m (the model surface to 850 hPa): 6.2 °C rising to 6.3 °C, 0.3 °C/km of
warming over 306 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1881 m contiguous at or above 80%
RH, 1251–3132 m across the model surface, 850 hPa, 800 hPa, 700 hPa (lowest 90%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4817 m and -18 °C at 5675 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 6 levels spanning 1251–5697 m (4446 m).
Lowest-layer lapse rate
-1.1 °C/km between the model surface (1251 m) and 850 hPa (1536 m) — temperature rises with height. Measured across 285 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
1251–1536 m (the model surface to 850 hPa): 6.2 °C rising to 6.5 °C, 1.1 °C/km of
warming over 285 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1857 m contiguous at or above 80%
RH, 1251–3108 m across the model surface, 850 hPa, 800 hPa, 700 hPa (lowest 95%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4626 m and -18 °C at 5472 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
What this page does not claim
This is a model profile, not a sounding. There is no radiosonde in it. The nearest
upper-air site to the Australian Alps is hundreds of kilometres away, and no observed
sounding is drawn on this chart — nor is the surface observation from /now,
which is one instrument at one height and would be a fabrication if plotted as a column.
Coverage is sparse and model-dependent. Below-terrain levels are already excluded,
which at an alpine grid point routinely removes 1000 and 925 hPa. An ECMWF profile
includes 850, 700, 600 and 500 hPa above the surface when all requested
triplets are present.
Nothing is extrapolated above the requested 500 hPa level.
Where the dendritic range sits above the supplied profile top, the page says the
supplied levels do not cover it — never that there is no dendritic zone.
No amount, no score. Deeper moisture and a bracketed dendritic range are structural
facts about the profile. Turning them into centimetres or a “powder rating” would be
inventing a number the data cannot support.
ACCESS-G has no point profile here. Its Open-Meteo domain has not initialised
since June 2025 and returns an all-null series; an empty profile with a model’s name on
it is worse than no chart. The Bureau’s current ACCESS-G chart products are available in
the app’s live ACCESS-G map viewer.