The shape of the modelled column above this mountain: temperature and wet-bulb against
height, humidity beside it, and four restrained readings of what that shape is. Up to nine
requested pressure levels, sparse and terrain-filtered, not a sounding — /now
has the surface observations, which are measurements and are deliberately kept separate
from this.
VIC · lifted 1450–1564 m
Model
View
Humidity
12 valid times, 6-hourly AEST, out to 72 hours.
Hours between these are not drawn.
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 982 m
ECMWF IFS· run Tue 29 2200hrs AEST · 1200Z · 13 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 982 m
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
ECMWF AIFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 982 m
Incomplete — some of this run is missing. Drawn values are genuine; gaps are not zeroes. Provider detail: missing variables: wind_gusts_10m.
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 927 m
GFS· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 927 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 12:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Wed 30 18:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 00:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 06:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 12:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Thu 1 18:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 00:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 06:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 12:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Fri 2 18:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 00:00 AEST· model grid terrain 663 m
ICON· run Wed 30 0400hrs AEST · 1800Z · 7 h ago· fetched 9 min ago · valid Sat 3 06:00 AEST· model grid terrain 663 m
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.4°base+7.5°top
dry-bulb +14.8° base · +13.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.3°base+8.7°top
dry-bulb +13.7° base · +13.2° top
Moisture + DGZ0.6 km+ 5205–5765 m+
Moist layer 1.4 km+ 4365–5765 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.0°base+8.5°top
dry-bulb +13.0° base · +12.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3136–4359 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.7°base+8.1°top
dry-bulb +10.7° base · +10.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3125–4348 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.4°base+8.6°top
dry-bulb +12.2° base · +11.0° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3125–4347 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.4°base+8.6°top
dry-bulb +10.8° base · +10.1° top
Moisture + DGZ0.5 km+ 5252–5742 m+
Moist layer 4.8 km+ 982–5742 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+8.1°base+8.1°top
dry-bulb +8.7° base · +8.7° top
Moisture + DGZ0.5 km+ 5222–5746 m+
Moist layer 4.8 km+ 982–5746 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.6°base+8.2°top
dry-bulb +9.3° base · +8.9° top
Moisture + DGZ0.5 km+ 5188–5730 m+
Moist layer 4.7 km+ 982–5730 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.7°base+8.1°top
dry-bulb +9.0° base · +8.5° top
Moisture + DGZ0.6 km+ 5111–5731 m+
Moist layer 4.7 km+ 982–5731 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.3°base+7.9°top
dry-bulb +9.2° base · +9.0° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 0.5 km 982–1522 m
Moist at resortPartial 72 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+8.5°base+8.1°top
dry-bulb +9.8° base · +9.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 0.5 km 982–1523 m
Moist at resortPartial 73 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+7.7°base+6.9°top
dry-bulb +8.4° base · +7.9° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 0.5 km 982–1512 m
Moist at resortPartial 62 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.5°base+7.6°top
dry-bulb +15.1° base · +14.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.3°base+8.5°top
dry-bulb +14.6° base · +13.8° top
Moisture + DGZ0.5 km+ 5282–5772 m+
Moist layer 1.4 km+ 4371–5772 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.7°base+9.1°top
dry-bulb +13.4° base · +13.1° top
Moisture + DGZ0.5 km+ 5266–5770 m+
Moist layer 2.6 km+ 3144–5770 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.2°base+8.6°top
dry-bulb +12.7° base · +12.2° top
Moisture + DGZ0.5 km+ 5298–5761 m+
Moist layer 2.6 km+ 3133–5761 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.8°base+9.0°top
dry-bulb +12.6° base · +11.6° top
Moisture + DGZ0.4 km+ 5321–5762 m+
Moist layer 2.6 km+ 3134–5762 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.4°base+8.8°top
dry-bulb +10.5° base · +9.8° top
Moisture + DGZ0.4 km+ 5334–5752 m+
Moist layer 4.8 km+ 982–5752 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.0°base+7.8°top
dry-bulb +8.4° base · +8.3° top
Moisture + DGZ0.5 km+ 5301–5753 m+
Moist layer 4.8 km+ 982–5753 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+8.1°base+7.8°top
dry-bulb +8.8° base · +8.6° top
Moisture + DGZ0.5 km+ 5216–5738 m+
Moist layer 4.8 km+ 982–5738 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+7.7°base+7.3°top
dry-bulb +8.0° base · +7.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 3.4 km 982–4346 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+7.8°base+7.2°top
dry-bulb +8.3° base · +7.9° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.1 km 982–3125 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+7.5°base+7.1°top
dry-bulb +8.4° base · +8.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.1 km 982–3124 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+7.7°base+7.1°top
dry-bulb +8.5° base · +8.0° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.1 km 982–3103 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+7.3°base+6.7°top
dry-bulb +12.9° base · +12.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+9.0°base+8.5°top
dry-bulb +12.3° base · +12.1° top
Moisture + DGZ0.4 km+ 5319–5760 m+
Moist layer 2.6 km+ 3133–5760 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+9.0°base+8.4°top
dry-bulb +13.0° base · +12.4° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.9°base+8.4°top
dry-bulb +10.3° base · +9.6° top
Moisture + DGZ0.4 km+ 5332–5745 m+
Moist layer 4.7 km+ 1052–5745 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+9.3°base+8.7°top
dry-bulb +11.6° base · +10.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.1 km 2027–3114 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+9.9°base+9.3°top
dry-bulb +10.7° base · +10.1° top
Moisture + DGZ0.4 km+ 5304–5738 m+
Moist layer 4.8 km+ 927–5738 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+6.6°base+6.3°top
dry-bulb +6.6° base · +6.3° top
Moisture + DGZ0.5 km+ 5191–5725 m+
Moist layer 4.8 km+ 927–5725 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+5.8°base+5.3°top
dry-bulb +5.8° base · +5.3° top
Moisture + DGZ0.7 km+ 5047–5711 m+
Moist layer 1.4 km+ 4314–5711 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+3.3°base+2.8°top
dry-bulb +3.3° base · +2.8° top
Moisture + DGZ0.8 km 4784–5599 m
Moist layer 4.8 km+ 927–5694 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+3.1°base+2.5°top
dry-bulb +3.2° base · +2.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 3.4 km 927–4302 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+3.7°base+3.2°top
dry-bulb +3.7° base · +3.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 3.4 km 927–4300 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+4.1°base+3.5°top
dry-bulb +4.2° base · +3.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 3.4 km 927–4295 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+7.9°base+7.2°top
dry-bulb +14.5° base · +13.9° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+9.0°base+8.2°top
dry-bulb +13.7° base · +13.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+9.6°base+9.0°top
dry-bulb +14.8° base · +14.2° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.2 km 3135–4356 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+8.8°base+8.3°top
dry-bulb +14.3° base · +13.7° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer No measured depth No contiguous moist interval
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.8°base+8.2°top
dry-bulb +10.2° base · +9.5° top
Moisture + DGZ0.4 km+ 5358–5738 m+
Moist layer 4.2 km+ 1526–5738 m
Moist at resortPartial 38 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+8.7°base+8.1°top
dry-bulb +8.7° base · +8.1° top
Moisture + DGZ0.5 km+ 5203–5737 m+
Moist layer 5.1 km+ 663–5737 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+6.2°base+5.8°top
dry-bulb +7.9° base · +7.4° top
Moisture + DGZ0.6 km+ 5150–5736 m+
Moist layer 4.2 km+ 1546–5736 m
Moist at resortPartial 18 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
▲ 1 warm-layer inversion
Resort wet-bulb+2.3°base+1.9°top
dry-bulb +5.1° base · +4.6° top
Moisture + DGZ0.7 km+ 5038–5720 m+
Moist layer 2.6 km+ 3113–5720 m
Moist at resortNo overlap 0 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+3.7°base+3.0°top
dry-bulb +4.1° base · +3.3° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 1.0 km 1087–2045 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+4.2°base+3.6°top
dry-bulb +4.3° base · +3.6° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.5 km 663–3118 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+5.0°base+4.4°top
dry-bulb +5.0° base · +4.4° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.4 km 663–3107 m
Moist at resortBase to top 114 m moist of 114 m resolvable
At this valid time
Full supplied profile, whichever chart view is shown
● No warm-layer inversion
Resort wet-bulb+5.7°base+5.1°top
dry-bulb +5.8° base · +5.1° top
Moisture + DGZNo overlap Moisture and DGZ are vertically separate
Moist layer 2.4 km 663–3092 m
Moist at resortBase to top 114 m moist of 114 m resolvable
Modelled vertical profile
Temperature, wet-bulb and relative humidity against metres above sea level
Full column · surface through the highest genuine supplied level.
Dry-bulbWet-bulbRelative humidityResort elevation bandMoist layerMoist + DGZ overlap Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — partly shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Dendritic range −12 to −18 °C — shaded Modelled inversion layerModel grid terrain
Mountain detail · genuine surface-through-700 hPa levels on a linear zoom.
Dry-bulbWet-bulbRelative humidityResort elevation bandMoist layerMoist + DGZ overlap DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view DGZ available in Full column view Modelled inversion layerModel grid terrain
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5779 m (4797 m).
Lowest-layer lapse rate
10 °C/km between the model surface (982 m) and 850 hPa (1552 m) — at or above the dry adiabatic rate. Measured across 570 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5227 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5765 m (4783 m).
Lowest-layer lapse rate
3.6 °C/km between the model surface (982 m) and 850 hPa (1542 m) — stable — shallow fall with height. Measured across 560 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1400 m contiguous at or above 80%
RH, 4365–5765 m across 600 hPa, 500 hPa (lowest 80%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5205 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5763 m (4781 m).
Lowest-layer lapse rate
1.6 °C/km between the model surface (982 m) and 850 hPa (1538 m) — stable — shallow fall with height. Measured across 556 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1223 m contiguous at or above 80%
RH, 3136–4359 m across 700 hPa, 600 hPa (lowest 81%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5306 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5752 m (4770 m).
Lowest-layer lapse rate
4 °C/km between the model surface (982 m) and 850 hPa (1533 m) — moderate — near the saturated rate. Measured across 551 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1223 m contiguous at or above 80%
RH, 3125–4348 m across 700 hPa, 600 hPa (lowest 92%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5319 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5751 m (4769 m).
Lowest-layer lapse rate
12 °C/km between the model surface (982 m) and 850 hPa (1531 m) — at or above the dry adiabatic rate. Measured across 549 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1222 m contiguous at or above 80%
RH, 3125–4347 m across 700 hPa, 600 hPa (lowest 85%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5310 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5742 m (4760 m).
Lowest-layer lapse rate
7 °C/km between the model surface (982 m) and 850 hPa (1527 m) — steep. Measured across 545 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4760 m contiguous at or above 80%
RH, 982–5742 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 84%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5252 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5746 m (4764 m).
Lowest-layer lapse rate
-2.4 °C/km between the model surface (982 m) and 850 hPa (1535 m) — temperature rises with height. Measured across 553 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
982–1535 m (the model surface to 850 hPa): 7.6 °C rising to 8.9 °C, 2.4 °C/km of
warming over 553 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
4764 m contiguous at or above 80%
RH, 982–5746 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 92%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5222 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5730 m (4748 m).
Lowest-layer lapse rate
2 °C/km between the model surface (982 m) and 850 hPa (1526 m) — stable — shallow fall with height. Measured across 544 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4748 m contiguous at or above 80%
RH, 982–5730 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 92%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5188 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5731 m (4749 m).
Lowest-layer lapse rate
3.5 °C/km between the model surface (982 m) and 850 hPa (1525 m) — stable — shallow fall with height. Measured across 543 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4749 m contiguous at or above 80%
RH, 982–5731 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 94%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5111 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5718 m (4736 m).
Lowest-layer lapse rate
0 °C/km between the model surface (982 m) and 850 hPa (1522 m) — near-isothermal. Measured across 540 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
540 m contiguous at or above 80%
RH, 982–1522 m across the model surface, 850 hPa (lowest 88%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 4925 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5712 m (4730 m).
Lowest-layer lapse rate
-1.5 °C/km between the model surface (982 m) and 850 hPa (1523 m) — temperature rises with height. Measured across 541 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
982–1523 m (the model surface to 850 hPa): 9.1 °C rising to 9.9 °C, 1.5 °C/km of
warming over 541 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
541 m contiguous at or above 80%
RH, 982–1523 m across the model surface, 850 hPa (lowest 84%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4802 m and -18 °C at 5617 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5686 m (4704 m).
Lowest-layer lapse rate
3.4 °C/km between the model surface (982 m) and 850 hPa (1512 m) — stable — shallow fall with height. Measured across 530 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
530 m contiguous at or above 80%
RH, 982–1512 m across the model surface, 850 hPa (lowest 90%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4707 m and -18 °C at 5460 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5783 m (4801 m).
Lowest-layer lapse rate
8.6 °C/km between the model surface (982 m) and 850 hPa (1553 m) — steep. Measured across 571 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5316 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5772 m (4790 m).
Lowest-layer lapse rate
6.9 °C/km between the model surface (982 m) and 850 hPa (1548 m) — moderate — near the saturated rate. Measured across 566 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1401 m contiguous at or above 80%
RH, 4371–5772 m across 600 hPa, 500 hPa (lowest 90%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5282 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5770 m (4788 m).
Lowest-layer lapse rate
2 °C/km between the model surface (982 m) and 850 hPa (1546 m) — stable — shallow fall with height. Measured across 564 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2626 m contiguous at or above 80%
RH, 3144–5770 m across 700 hPa, 600 hPa, 500 hPa (lowest 84%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5266 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5761 m (4779 m).
Lowest-layer lapse rate
4 °C/km between the model surface (982 m) and 850 hPa (1535 m) — moderate — near the saturated rate. Measured across 553 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2628 m contiguous at or above 80%
RH, 3133–5761 m across 700 hPa, 600 hPa, 500 hPa (lowest 83%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5298 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5762 m (4780 m).
Lowest-layer lapse rate
9 °C/km between the model surface (982 m) and 850 hPa (1538 m) — steep. Measured across 556 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2628 m contiguous at or above 80%
RH, 3134–5762 m across 700 hPa, 600 hPa, 500 hPa (lowest 80%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5321 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5752 m (4770 m).
Lowest-layer lapse rate
5.6 °C/km between the model surface (982 m) and 850 hPa (1533 m) — moderate — near the saturated rate. Measured across 551 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4770 m contiguous at or above 80%
RH, 982–5752 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 88%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5334 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5753 m (4771 m).
Lowest-layer lapse rate
0.4 °C/km between the model surface (982 m) and 850 hPa (1541 m) — near-isothermal. Measured across 559 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4771 m contiguous at or above 80%
RH, 982–5753 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 94%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5301 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5738 m (4756 m).
Lowest-layer lapse rate
-0.4 °C/km between the model surface (982 m) and 850 hPa (1532 m) — near-isothermal. Measured across 550 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
982–1532 m (the model surface to 850 hPa): 8.6 °C rising to 8.8 °C, 0.4 °C/km of
warming over 550 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
4756 m contiguous at or above 80%
RH, 982–5738 m across the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 87%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5216 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5743 m (4761 m).
Lowest-layer lapse rate
2.8 °C/km between the model surface (982 m) and 850 hPa (1545 m) — stable — shallow fall with height. Measured across 563 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
3364 m contiguous at or above 80%
RH, 982–4346 m across the model surface, 850 hPa, 700 hPa, 600 hPa (lowest 85%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5083 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5735 m (4753 m).
Lowest-layer lapse rate
3.4 °C/km between the model surface (982 m) and 850 hPa (1543 m) — stable — shallow fall with height. Measured across 561 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2143 m contiguous at or above 80%
RH, 982–3125 m across the model surface, 850 hPa, 700 hPa (lowest 84%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 4954 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5729 m (4747 m).
Lowest-layer lapse rate
1.8 °C/km between the model surface (982 m) and 850 hPa (1544 m) — stable — shallow fall with height. Measured across 562 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2142 m contiguous at or above 80%
RH, 982–3124 m across the model surface, 850 hPa, 700 hPa (lowest 82%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4876 m and -18 °C at 5701 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 850 hPa, 700 hPa, 600 hPa, 500 hPa — 5 levels spanning 982–5706 m (4724 m).
Lowest-layer lapse rate
3.5 °C/km between the model surface (982 m) and 850 hPa (1524 m) — stable — shallow fall with height. Measured across 542 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2121 m contiguous at or above 80%
RH, 982–3103 m across the model surface, 850 hPa, 700 hPa (lowest 83%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4837 m and -18 °C at 5678 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5774 m (4847 m).
Lowest-layer lapse rate
21.2 °C/km between the model surface (927 m) and 900 hPa (1064 m) — at or above the dry adiabatic rate. Measured across 137 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5170 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5760 m (4833 m).
Lowest-layer lapse rate
-3.8 °C/km between the model surface (927 m) and 900 hPa (1060 m) — temperature rises with height. Measured across 133 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
927–1060 m (the model surface to 900 hPa): 11.8 °C rising to 12.3 °C, 3.8 °C/km of
warming over 133 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
2627 m contiguous at or above 80%
RH, 3133–5760 m across 700 hPa, 600 hPa, 500 hPa (lowest 85%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5319 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5753 m (4826 m).
Lowest-layer lapse rate
-15.3 °C/km between the model surface (927 m) and 900 hPa (1051 m) — temperature rises with height. Measured across 124 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
927–1051 m (the model surface to 900 hPa): 12.9 °C rising to 14.8 °C, 15.3 °C/km of
warming over 124 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5231 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5745 m (4818 m).
Lowest-layer lapse rate
16 °C/km between the model surface (927 m) and 900 hPa (1052 m) — at or above the dry adiabatic rate. Measured across 125 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4693 m contiguous at or above 80%
RH, 1052–5745 m across 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 80%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5332 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5744 m (4817 m).
Lowest-layer lapse rate
34.5 °C/km between the model surface (927 m) and 900 hPa (1043 m) — at or above the dry adiabatic rate. Measured across 116 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1087 m contiguous at or above 80%
RH, 2027–3114 m across 800 hPa, 700 hPa (lowest 83%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5331 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5738 m (4811 m).
Lowest-layer lapse rate
-17.9 °C/km between the model surface (927 m) and 900 hPa (1039 m) — temperature rises with height. Measured across 112 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
927–1039 m (the model surface to 900 hPa): 10.5 °C rising to 12.5 °C, 17.9 °C/km of
warming over 112 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
4811 m contiguous at or above 80%
RH, 927–5738 m across the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 89%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5304 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5725 m (4798 m).
Lowest-layer lapse rate
2.3 °C/km between the model surface (927 m) and 900 hPa (1056 m) — stable — shallow fall with height. Measured across 129 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4798 m contiguous at or above 80%
RH, 927–5725 m across the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 96%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5191 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5711 m (4784 m).
Lowest-layer lapse rate
4.4 °C/km between the model surface (927 m) and 900 hPa (1063 m) — moderate — near the saturated rate. Measured across 136 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
1397 m contiguous at or above 80%
RH, 4314–5711 m across 600 hPa, 500 hPa (lowest 80%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5047 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5694 m (4767 m).
Lowest-layer lapse rate
9.5 °C/km between the model surface (927 m) and 900 hPa (1074 m) — steep. Measured across 147 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4767 m contiguous at or above 80%
RH, 927–5694 m across the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 87%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4784 m and -18 °C at 5599 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5682 m (4755 m).
Lowest-layer lapse rate
9.5 °C/km between the model surface (927 m) and 900 hPa (1074 m) — steep. Measured across 147 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
3375 m contiguous at or above 80%
RH, 927–4302 m across the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa (lowest 96%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4554 m and -18 °C at 5564 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5679 m (4752 m).
Lowest-layer lapse rate
9.7 °C/km between the model surface (927 m) and 900 hPa (1072 m) — steep. Measured across 145 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
3373 m contiguous at or above 80%
RH, 927–4300 m across the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa (lowest 98%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4610 m and -18 °C at 5454 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 7 levels spanning 927–5672 m (4745 m).
Lowest-layer lapse rate
8.3 °C/km between the model surface (927 m) and 900 hPa (1072 m) — steep. Measured across 145 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
3368 m contiguous at or above 80%
RH, 927–4295 m across the model surface, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa (lowest 98%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4472 m and -18 °C at 5290 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5780 m (5117 m).
Lowest-layer lapse rate
4.7 °C/km between the model surface (663 m) and 925 hPa (832 m) — moderate — near the saturated rate. Measured across 169 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5300 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5763 m (5100 m).
Lowest-layer lapse rate
-1.9 °C/km between the model surface (663 m) and 925 hPa (822 m) — temperature rises with height. Measured across 159 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
663–822 m (the model surface to 925 hPa): 16.9 °C rising to 17.2 °C, 1.9 °C/km of
warming over 159 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5295 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5758 m (5095 m).
Lowest-layer lapse rate
-2.6 °C/km between the model surface (663 m) and 925 hPa (815 m) — temperature rises with height. Measured across 152 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
663–815 m (the model surface to 925 hPa): 17.4 °C rising to 17.8 °C, 2.6 °C/km of
warming over 152 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
1221 m contiguous at or above 80%
RH, 3135–4356 m across 700 hPa, 600 hPa (lowest 87%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5248 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5750 m (5087 m).
Lowest-layer lapse rate
-3.5 °C/km between the model surface (663 m) and 925 hPa (806 m) — temperature rises with height. Measured across 143 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
663–806 m (the model surface to 925 hPa): 16.7 °C rising to 17.2 °C, 3.5 °C/km of
warming over 143 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
No two adjacent supplied levels are both at or above 80% RH, so no depth can be measured. A single humid
level is not a depth.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5344 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5738 m (5075 m).
Lowest-layer lapse rate
1.3 °C/km between the model surface (663 m) and 925 hPa (817 m) — stable — shallow fall with height. Measured across 154 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
4212 m contiguous at or above 80%
RH, 1526–5738 m across 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 82%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5358 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5737 m (5074 m).
Lowest-layer lapse rate
1.1 °C/km between the model surface (663 m) and 925 hPa (837 m) — stable — shallow fall with height. Measured across 174 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
5074 m contiguous at or above 80%
RH, 663–5737 m across the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 91%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5203 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5736 m (5073 m).
Lowest-layer lapse rate
-1.1 °C/km between the model surface (663 m) and 925 hPa (845 m) — temperature rises with height. Measured across 182 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
663–845 m (the model surface to 925 hPa): 10.0 °C rising to 10.2 °C, 1.1 °C/km of
warming over 182 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
4190 m contiguous at or above 80%
RH, 1546–5736 m across 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa (lowest 80%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5150 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5720 m (5057 m).
Lowest-layer lapse rate
-1.6 °C/km between the model surface (663 m) and 925 hPa (854 m) — temperature rises with height. Measured across 191 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
663–854 m (the model surface to 925 hPa): 8.0 °C rising to 8.3 °C, 1.6 °C/km of
warming over 191 m.
A feature of this coarse model profile, not an observed inversion. It
may equally be an artefact of interpolating a wide grid over steep
terrain.
Moist-layer depth
2607 m contiguous at or above 80%
RH, 3113–5720 m across 700 hPa, 600 hPa, 500 hPa (lowest 89%).
The layer runs into the top of the supplied profile, so its real
depth is at least this and unknown above it.
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Partially covered The -12 °C bound is at 5038 m; the -18 °C bound lies above 500 hPa, the highest level supplied, and is not extrapolated to. The depth of the overlap is therefore a lower bound, not a measurement.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5709 m (5046 m).
Lowest-layer lapse rate
5.1 °C/km between the model surface (663 m) and 925 hPa (861 m) — moderate — near the saturated rate. Measured across 198 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
958 m contiguous at or above 80%
RH, 1087–2045 m across 900 hPa, 850 hPa, 800 hPa (lowest 80%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4756 m and -18 °C at 5561 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5702 m (5039 m).
Lowest-layer lapse rate
2.6 °C/km between the model surface (663 m) and 925 hPa (857 m) — stable — shallow fall with height. Measured across 194 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2455 m contiguous at or above 80%
RH, 663–3118 m across the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa (lowest 86%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4354 m and -18 °C at 5353 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5690 m (5027 m).
Lowest-layer lapse rate
3.3 °C/km between the model surface (663 m) and 925 hPa (847 m) — stable — shallow fall with height. Measured across 184 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2444 m contiguous at or above 80%
RH, 663–3107 m across the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa (lowest 91%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4548 m and -18 °C at 5374 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
Complete supplied-profile diagnostics
Uses every genuine supplied level through the profile top, regardless of the
selected chart view.
Supplied levels
the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa, 600 hPa, 500 hPa — 8 levels spanning 663–5669 m (5006 m).
Lowest-layer lapse rate
1.8 °C/km between the model surface (663 m) and 925 hPa (832 m) — stable — shallow fall with height. Measured across 169 m, so it is
a layer average and cannot resolve structure inside that depth.
Modelled inversions
None between adjacent supplied levels. That is not the same as no
inversion: one shallower than the gap between two levels would not appear
here at all.
Moist-layer depth
2429 m contiguous at or above 80%
RH, 663–3092 m across the model surface, 925 hPa, 900 hPa, 850 hPa, 800 hPa, 700 hPa (lowest 87%).
Descriptive moisture depth — where the model is humid. Not proof of
cloud, and not proof of snowfall.
Dendritic growth range (-12 to -18 °C)
Covered by the supplied levels The supplied levels bracket both bounds: -12 °C at 4447 m and -18 °C at 5280 m, interpolated between adjacent supplied levels. Overlap is a property of this profile’s temperature structure — it is not a statement that snow is growing there.
What this page does not claim
This is a model profile, not a sounding. There is no radiosonde in it. The nearest
upper-air site to the Australian Alps is hundreds of kilometres away, and no observed
sounding is drawn on this chart — nor is the surface observation from /now,
which is one instrument at one height and would be a fabrication if plotted as a column.
Coverage is sparse and model-dependent. Below-terrain levels are already excluded,
which at an alpine grid point routinely removes 1000 and 925 hPa. An ECMWF profile
includes 850, 700, 600 and 500 hPa above the surface when all requested
triplets are present.
Nothing is extrapolated above the requested 500 hPa level.
Where the dendritic range sits above the supplied profile top, the page says the
supplied levels do not cover it — never that there is no dendritic zone.
No amount, no score. Deeper moisture and a bracketed dendritic range are structural
facts about the profile. Turning them into centimetres or a “powder rating” would be
inventing a number the data cannot support.
ACCESS-G has no point profile here. Its Open-Meteo domain has not initialised
since June 2025 and returns an all-null series; an empty profile with a model’s name on
it is worse than no chart. The Bureau’s current ACCESS-G chart products are available in
the app’s live ACCESS-G map viewer.